English Español 한국말
The Specialists in Pressing and Fusing
Contact Us

Hoffman Presses - Final Pressing


Product Image
View Larger
Topcon T-810

Fully automatic vertical jeans press to finish jeans in one simple operation with basic microprocessor control. The Hoffman T-810 is designed to give jeans a smooth, soft finish in one easy operation.

Standard Features
  • Steam jets specially designed for maximum fast penetration and low operating decibel level
  • Powerful blower motor for fast hot air drying
  • Superheater to maintain proper steam temperature eliminating any chance of wet steam or water damage to garments
  • Automatic cuff clamp assembly tensions legs
  • Cuff clamp assembly easily adjustable for different garments, e.g. jeans, shorts, etc. and flat fold or center crease presentation
  • Manual steam button
  • Easy to read Vacuum Fluorescent Display Control Panel for absolute clear viewing of control data from any angle and in any lighting condition
  • Visual diagnostic systems for easy maintenance
  • Program counter with rate and average display to monitor operator efficiency
  • Automatic flyclamp length adjustment
  • Automatic/Manual Control Switch
Specifications
  • Electrical: 240v, 3 phase, 60Hz, 10amps
  • Maximum Air Pressure: 80 psi [5.5 bar]
  • Air Consumption Free air per cycle @ 80 psi: .05ft³ [0.0014 M³]
  • Steam @ 100 psi [7 bar]: 50lb/hr [23 kg/hr]
  • Net Machine Weight: 490lbs [222 kg]
  • Shipping Weight: 530lbs [240 kg]
Finishing Applications
  • Shorts
  • Skirts
  • Casual non-crease pants
  • Corduroy, velvet and fleece pants
  • Softening of wrinkle-free pants
Special Features
  • Ergonomic side-to-side automatic waistband expansion
  • Lockable microprocessor control of steam, steam/air and air cycle
  • Programmable temperature control for superheater
  • Accessible simple steam volume control
  • Automatic flyclamp length adjustment
  • High productivity
  • Consistent quality finish
  • No skill required
  • Minimal operator training
  • Reduced cost
Options
  • Interchangeable waistband forms for men's ladies' and children's garments
  • Skirt attachment for cuff clamp assembly


Product Image
View Larger
Topcon T-814

Fully automatic vertical jeans press to finish jeans in one simple operation with special microprocessor to control press cycle, waistband and leg dimensions. The Hoffman T-814 is designed to give jeans a smooth, soft finish in one easy operation.

Standard Features
  • Steam jets specially designed for maximum fast penetration and low operating decibel level
  • Powerful blower motor for fast hot air drying
  • Superheater to maintain proper steam temperature eliminating any chance of wet steam or water damage to garments
  • Automatic cuff clamp assembly tensions legs
  • Cuff clamp assembly easily adjustable for different garments, e.g. jeans, shorts, etc. and flat fold or center crease presentation
  • Manual steam button
  • Easy to read Vacuum Fluorescent Display Control Panel for absolute clear viewing of control data from any angle and in any lighting condition
  • Visual diagnostic systems for easy maintenance
  • Program counter with rate and average display to monitor operator efficiency
  • Automatic flyclamp length adjustment
Specifications
  • Electrical: 208 220/240v, 3 phase, 50/60Hz, 10amps
  • Maximum Air Pressure: 80 psi [5.5 bar]
  • Air Consumption Free air per cycle @ 80 psi: .05ft³ [0.0014 M³]
  • Steam @ 100 psi [7 bar]: 50lb/hr [23 kg/hr]
  • Net Machine Weight: 557lbs [253 kg]
  • Shipping Weight: 597lbs [271 kg]
Finishing Applications
  • Shorts
  • Skirts
  • Casual non-crease pants
  • Corduroy, velvet and fleece pants
  • Softening of wrinkle-free pants
Special Features
  • Unique capability to program precisely for the finishing of all fabrics from 100% cotton to difficult blends of cotton/Lycra and microfibers to maintain or adjust sewn size exactly, as desired
  • Field programmable and lockable 40-program, multi-function microprocessor
  • Programmable variable air blower speed from 0-100% for flexibility of processing different fabrics
  • Programmable temperature control for superheater
  • Accessible simple steam volume control
  • Measurement scale with easily adjustable stops for stretch-sensitive fabrics
  • Dual cuff clamp assembly with push button selection of inside cuff tensioning or outside cuff clamping - new design holds steam and air in the trouser leg for superior finishing unlike post styles
  • Total guaranteed control of waistband/inseam measurement without stretching
  • High productivity
  • Consistent quality finish
  • No skill required
  • Minimal operator training
  • Reduced cost
Options
  • Interchangeable waistband forms for men's ladies' and children's garments
  • Skirt attachment for cuff clamp assembly


Product Image
View Larger
Topcon T-815

Fully automatic vertical jeans press to finish jeans in one simple operation with special microprocessor to control press cycle, waistband and leg dimensions. The Hoffman T-815 is designed to give jeans a smooth, soft finish in one easy operation. (With front pocket/pleat pressing attachments)

Standard Features
  • Steam jets specially designed for maximum fast penetration and low operating decibel level
  • Powerful blower motor for fast hot air drying
  • Superheater to maintain proper steam temperature eliminating any chance of wet steam or water damage to garments
  • Automatic cuff clamp assembly tensions legs
  • Cuff clamp assembly easily adjustable for different garments, e.g. jeans, shorts, etc. and flat fold or center crease presentation
  • Manual steam button
  • Easy to read Vacuum Fluorescent Display Control Panel for absolute clear viewing of control data from any angle and in any lighting condition
  • Visual diagnostic systems for easy maintenance
  • Program counter with rate and average display to monitor operator efficiency
  • Automatic flyclamp length adjustment
Specifications
  • Electrical: 220/240v, 1 phase, 50/60Hz, 12amps
  • Maximum Air Pressure: 80 psi [5.5 bar]
  • Air Consumption Free air per cycle @ 80 psi: .05ft³ [0.0014 M³]
  • Steam @ 100 psi [7 bar]: 50lb/hr [23 kg/hr]
  • Net Machine Weight: 557lbs [253 kg]
  • Shipping Weight: 597lbs [271 kg]
Finishing Applications
  • Shorts
  • Skirts
  • Casual non-crease pants
  • Corduroy, velvet and fleece pants
  • Softening of wrinkle-free pants
  • Front pocket/pleat pressing attachments
Special Features
  • Unique capability to program precisely for the finishing of all fabrics from 100% cotton to difficult blends of cotton/Lycra and microfibers to maintain or adjust sewn size exactly, as desired
  • Field programmable and lockable 40-program, multi-function microprocessor
  • Programmable variable air blower speed from 0-100% for flexibility of processing different fabrics
  • Programmable temperature control for superheater
  • Accessible simple steam volume control
  • Measurement scale with easily adjustable stops for stretch-sensitive fabrics
  • Dual cuff clamp assembly with push button selection of inside cuff tensioning or outside cuff clamping - new design holds steam and air in the trouser leg for superior finishing unlike post styles
  • Total guaranteed control of waistband/inseam measurement without stretching
  • High productivity
  • Consistent quality finish
  • No skill required
  • Minimal operator training
  • Reduced cost
Options
  • Interchangeable waistband forms for men's ladies' and children's garments
  • Skirt attachment for cuff clamp assembly


Product Image
View Larger
BCG-L8S legger/utility (T11 topper uses same BCG frame)

Affordable productivity from a legger and topper for a hard press quality finish

Versatile configuration incorporates a crotch cutout allowing creasing of an entire leg to proper height in one lay. Narrow end of buck is ideal for topping or utility work. Table-mounted pressure control enables easy, accurate adjustment for fabric tupe. Specially-designed steam and vacuum chambers provide better heat and steam distribution, faster drying, and even finishing.

Typical Specifications
  • Steam Consumption @ 80 PSIG: 30lb/hr (13.6kg/hr)
  • Maximum Steam Pressure: 125 PSIG (862 K Pa)
  • Maximum Air Pressure: 80 PSIG (552 K Pa)
  • Air Consumption - Free Air Per Cycle @ 80 PSIG: 0.69 ft³ (0.02M³)
  • Vacuum Requirement (Minimum): 0.75 HP
  • Vacuum Connection Size: 2in
  • Weight: 625lb [283 kg]
  • Shipping Weight: 675 lb [305 kg]


Product Image
View Larger
L-4 Buck

Flat buck legger is designed for shaping, shrinking and pressing men's and ladies' trouser legs. The crotch cut-out is deep enough to allow for easy lay up of any size trouser.